軟包裝常用八大材料及性能，感興趣的朋友快點收藏一下吧。

Eight materials and properties are commonly used in flexible packaging. Please collect them quickly if you are interested.

1、 BOPP 學名為雙向拉伸聚丙烯(電暈值≥38dy/m2)

1. The scientific name of BOPP is biaxially oriented polypropylene (corona value ≥ 38dy/m2)

(1)、由于分子定向、結晶度提高，其抗張強度、沖擊強度、剛性韌性、阻濕性、透明性、耐寒性都較好。(2)、無味、無臭、可直接用于同食品和藥品接觸。(3)、無熱封性。(4)、撕裂強度低、須注意卷膜缺口會造成斷膜。(5)、須經電暈處理方能進行印刷或復合。

(1) Due to molecular orientation and improved crystallinity, its tensile strength, impact strength, rigidity and toughness, moisture resistance, transparency and cold resistance are good. (2) It is odorless and tasteless, and can be directly used in contact with food and drugs. (3) No heat sealing. (4) The tear strength is low. It should be noted that the roll film gap will cause film breakage. (5) Printing or compounding can only be carried out after corona treatment.

2、CPP 學名 流涎聚丙烯(電暈值≥38dy/m2)(1)、光澤性、透明性優良。(2)、定制有適中的強度和優良的阻濕性能。(3)、具有良好的熱封性、耐熱性好。(4)、耐油性優良。(好過LDPE)(5)、無臭、無味、寄生性好。(6)、耐化學藥品性好(7)、耐寒性差，均聚丙烯10℃以下就有低溫脆性、不能使用在0℃以下的場所、共聚丙烯可以。(8)、透氣性大、易產生靜電、易吸附灰塵。

2. The scientific name of CPP is salivating polypropylene (corona value ≥ 38dy/m2) (1). It has excellent luster and transparency. (2) Customized with moderate strength and excellent moisture resistance. (3) It has good heat sealing and heat resistance. (4) Excellent oil resistance. (Better than LDPE) (5) Odorless, tasteless and parasitic. (6) Good chemical resistance (7), poor cold resistance. Homopolypropylene has low temperature brittleness below 10 ℃, and co polypropylene can be used in places where it cannot be used below 0 ℃. (8) Large permeability, easy to generate static electricity, easy to absorb dust.

3、PE 學名聚乙烯(電暈值≥38dy/m2)(1)、易熱封。溫度80-90℃、熔點110-120℃。(2)、伸長率大，沖擊強度大、柔軟性、韌性好(3)、耐水性、阻濕性好，耐化學性、藥品性優良。(4)、設計耐低溫性優良，低溫條件下柔軟性較好。(5)、無臭、無味、透明性好。(6)、透氣性大。(7)、耐油性差、包裝油性食品易滲油。(8)、易產生靜電。

3. PE scientific name: polyethylene (corona value ≥ 38dy/m2) (1), easy to heat seal. The temperature is 80-90 ℃, and the melting point is 110-120 ℃. (2) High elongation, high impact strength, good flexibility and toughness (3), good water resistance, moisture resistance, chemical resistance and drug resistance. (4) The design has excellent low temperature resistance and good flexibility under low temperature conditions. (5) Odorless, tasteless and transparent. (6) High permeability. (7) Poor oil resistance, and the packaged oily food is easy to leak oil. (8) . It is easy to generate static electricity.

4、 PET 學名 聚酯(電暈值≥48dy/m2)(1)、機械強度高、可在較薄的情況下使用(2)、透明性好，光線透過率在90%以上、光澤性好。能吸收紫外線。(3)、耐熱性、耐寒性好、熱收縮率較小、尺寸穩定性好。(4)、保鮮性好。阻氣性優于PE、阻濕性同PE差不多。(5)、衛生性好。不含增塑劑等物質。

4. PET has the scientific name of polyester (corona value ≥ 48dy/m2) (1), high mechanical strength, and can be used in thin cases (2), good transparency, light transmittance of more than 90%, and good luster. It can absorb ultraviolet rays. (3) Good heat resistance, cold resistance, small thermal shrinkage and good dimensional stability. (4) Good freshness. The gas resistance is better than PE, and the moisture resistance is similar to PE. (5) Good hygiene. No plasticizer and other substances.

5、BOPA.(NY).學名尼龍、聚酰胺。(電暈值≥52dy/m2)

5. BOPA. (NY). The scientific names are nylon and polyamide. (Corona value ≥ 52dy/m2)

(1)、強韌性很大、具有良好的抗張強度、伸長率、撕裂強度及耐磨性。(2)、耐穿刺性好。(3)、低溫特性優良、可在-60℃——200℃使用。(4)、耐油性、耐酸堿性、耐藥品性、耐溶劑性好，具有一定的阻氣性。(5)、不易產生靜電、印刷性好。(6)、易吸水，尺寸穩定性較差。

(1) It has great strength and toughness, good tensile strength, elongation, tear strength and wear resistance. (2) Good puncture resistance. (3) It has excellent low-temperature characteristics and can be used at - 60 ℃ - 200 ℃. (4) Good oil resistance, acid and alkali resistance, drug resistance, solvent resistance and gas resistance. (5) It is not easy to generate static electricity and has good printability. (6) It is easy to absorb water and has poor dimensional stability.

6、PVC 學名聚偏氯乙烯(電暈值≥38dy/m2)(1)、透明性好、易成型。(2)、透氧率、透水蒸汽性比LDPE小、溶劑透過率小。(3)、著色性好、印刷適性，熱封性好。(4)、耐化學藥品性好。(5)、易于拉伸、須使用較小張力。

6. The scientific name of PVC is polyvinylidene chloride (corona value ≥ 38dy/m2) (1), with good transparency and easy molding. (2) Oxygen permeability and water vapor permeability are smaller than LDPE, and solvent permeability is smaller. (3) Good colourability, printability and heat sealing. (4) Good chemical resistance. (5) . It is easy to stretch, and small tension must be used.

7、AL 鋁箔(1)、廠家阻光性、阻濕性、阻氣性好。(2)、傳熱快、易受熱、易冷卻。(3)、不耐酸堿(4)、易卷曲形成裂紋或起皺。(5)、抗張強度低、使用張力應低于3kg/m2。

7. AL aluminum foil (1), good light resistance, moisture resistance and gas resistance of the manufacturer. (2) Fast heat transfer, easy to be heated and cooled. (3) . It is not resistant to acid and alkali (4). It is easy to curl and form cracks or wrinkles. (5) The tensile strength is low, and the service tension should be lower than 3kg/m2.

8、 PT.學名玻璃紙.(1)、透明性好、光澤性好、印刷適性好。(2)、抗張強度大、伸長率小、切割性好、機械適性優良。(3)、不帶靜電或很少帶靜電、不易粘上灰塵。(4)、撕裂強度小、易開口。(5)、耐油性好。(6)、耐熱性好。(7)、阻氣性好。(8)、阻水性差、易變形。(9)、衛生性好、無臭、無味

8. PT. Scientific name cellophane (1) Good transparency, gloss and printability. (2) High tensile strength, low elongation, good cutting performance and excellent mechanical adaptability. (3) There is no or little static electricity and it is not easy to stick dust. (4) Low tear strength and easy opening. (5) Good oil resistance. (6) Good heat resistance. (7) Good gas resistance. (8) Poor water resistance and easy deformation. (9) Good hygiene, odorless and tasteless

以上就是為大家介紹的有關濟南方便袋的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.beydey.com

The above is a detailed introduction to Jinan Convenience Bag. I hope it will be helpful to you. If you have any questions, please contact us. We will provide services for you with our attitude http://www.beydey.com